- Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
- Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
|Measuring range||AC 0.1 – 130Arms (185Apeak)||DC 0 – ±180A|
|Output voltage||AC 10mV/A||DC 10mV/A|
±2.5%rdg±0.4mV (40 – 1kHz)
|Low battery warning||2.2V±0.2V or less – Red LED flash|
(1.9V±0.2V – Automatically power off)
|Conductor size||Max. Ø12mm|
|Withstand voltage||AC 3540V (RMS 50/60Hz) for 5 sec.|
|Operating temperature & humidity range||-10 to 55ºC, relative humidity 85% or less (no condensation)|
|Output impedance||Approx. 10Ω or less|
|Applicable standards||IEC 61010-1 CAT III 300V Pollution degree 2,|
IEC 61010-2-032, IEC 61326-1
|Power source||DC3V (size AAA alkaline battery LR03×2pcs)|
* Continuous use: approx. 40 hours
(Auto power off: approx. 20 minutes)
|Cord length||Approx. 1,200mm|
|Output connector||Φ4mm banana plug|
|Accessories||Soft case, LR03×2, Instruction manual|
*This accuracy is defined after the completion of the Kew 8115 zero-adjustment whilst connected to a DMM.